Stable, fast and cheap system to support ducts, pipes and any other part of the installation.
Used on ductwork to provide an airtight seal, a sure and long lasting moisture-proof and sealing-proof barrier against weather influences
Alutex is lightweight, flexible, non-insulated duct designed for the installation into the existing and new ventilation systems. It is made of
ALUTEX ANTIBACTERIAL is lightweight flexible non-insulated air duct made of multilayer, polyester laminated aluminium anti-microbially treated foil
Heavy duty self-vulcanizing cold shrinking tape with aluminium film and composed of 3 layers
In order to isolate vibrations caused by air handling units and fans connected to air ducts, it is highly recommended to install a flexible duct
Galvanized steel pressed and seam welded bends 15°. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel segmented bends 15°, with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 15°, with rubber sealing. Radius r = 1 x D. The airthightness class is also determined by the
Galvanized steel pressed and seam welded bends 30°. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel segmented bends 30°, with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 30°, with rubber sealing. Radius r = 1 x D. The airthightness class is also determined by the
Galvanized steel segmented bends 60°, with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 45°, with rubber sealing. Radius r = 1 x D. The airthightness class is also determined by the
Galvanized steel segmented bends 45°, with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel segmented bends 45° with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 60°. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 60°, with rubber sealing. Radius r = 1 x D. The airthightness class is also determined by the
Galvanized steel pressed and seam welded bends 90°. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel segmented bends 90°, with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
Galvanized steel pressed and seam welded bends 90°, with rubber sealing. The airthightness class is also determined by the mounting on the
Galvanized steel segmented bends 90° with rubber sealing. The airthightness class is also determined by the mounting on the construction site.
BCM is a sealant glue with no fire resistance.
The access doors for round ducting (CAD) consist of two panels connected between themselves with two screws, springs and knobs. The inner panel will
The access doors for round ducting (CAD-SS) consist of two panels connected between themselves with two screws, springs and knobs. The inner panel
The quick lock hose clamps consists of continuous serrated banding with rounded edges. They are designed to secure flexible ducts to outlets, pipes
Cloth duct tape 24x50m
Screw clamps in galvanized steel
Connection nuts for threaded rods, Available in M6, M8 or M10
The CTKN beam clamps are made to secure threaded rods without drilling or welding onto beams.
The DobyGrip wire suspension system is used to suspend static loads. In short, it’s the perfect alternative to traditional methods such as threaded
Glass wool duct insulation of 25 mm thickness
Galvanized steel end cap with rubber sealing for accessories.
Brass anchor For fixation in concrete, wood or solid brik
The access doors for rectangular ducting (FAD) consist of two panels connected between themselves with two screws, springs and knobs. The inner
The access doors for rectangular ducting (FAD-SS) consist of two panels connected between themselves with two screws, springs and knobs. The inner
Galvanized steel pressed symmetrical branches 90°. The airthightness class is also determined by the mounting on the construction site.
The FBM hose clamps consist of a continuous serrated banding with rounded edges. The tightening device consist of a tilting housing and screw. This
Connecting collars which facilitate the installation and removal of in-lines fans for service and cleaning. Made from galvanised sheet steel and
45° flaring and swaging kit for copper tubes 1/8" - 3/4"
Indipendent modular ground support for oudoor units and VRV/VRF systems. Modular structure. Quick to install. Reduces the vibrations to
Perforated bands are designed for suspension of ventilation ducts, pipes and other equipments. Easy to fold and cut, GPB is a quick and competitive
The GT-PE gasket foam tapes are designed to ensure air tightness between a wide variety of elements in duct work systems (between ducts, joining
Corners to be fixed on duct profiles in galvanized steel