The type AEPGOOB circular air flow measuring station is designed for the accurate measurement of air flow in air duct systems courtesy of the
The type AEPOOOB circular air flow measuring station is designed for the accurate measurement of air flow in air duct systems courtesy of the
The type AERGOOB rectangular air flow measuring station is designed for the accurate measurement of air flow in air duct systems courtesy of the
The type AEROOOB rectangular air flow measuring station is designed for the accurate measurement of air flow in air duct systems courtesy of the
The type AFQGOOB circular air flow measuring and air flow control station is designed for the accurate measurement and control of the air flow in
The type AFQOOOB circular air flow measuring and air flow control station is designed for the accurate measurement and control of the air flow in
The type AFSOOOB rectangular air flow measuring station is designed for the accurate measurement and control of the air flow in air duct systems
Electric heating controller (slave unit) with over-temperature protection.
Electric heating controller with integrated temperature sensor
The type AHQOOOB circular air flow measuring and pressure control station is designed to control the supply duct pressure per zone, to a minimum
The type AHSDOOB rectangular air flow measuring and pressure control station is designed to control the supply duct pressure per zone, to a minimum
The type AHSFOOB rectangular air flow measuring and pressure control station is designed to control the supply duct pressure per zone, to a minimum
This Cubic monitor / sensor indicates the current air quality in your area. The CO2 sensor NDIR is self-calibrating and of the highest quality. The
Light and compact 230 VAC autotransformers, 1.5 - 20 A, Eigth voltage taps available: 0-80-100-120-150-170-190-230 VAC, 50-60 Hz
Light and compact 400 VAC autotransformers, 1.5 - 14 A, seven voltage taps available:0-130-170-220-260-300-400 VAC, 50-60 Hz
The spring return actuator BFL(T) is specially designed to remotely control fire dampers.
The spring return actuator BFN(T) is specially designed to remotely control fire dampers.
A leakage alarm which activates an alarm for leakages of electrically conductive fluids such as water.
The Modbus RTU serial info is automatically converted to serial information on a USB virtual COM port in both transmitted and received
Analogue to Modbus RTU converter
The DDACM series are intended for converting Modbus RTU (RS485) data into analogue / modulating output signal (0—10 VDC / 0—20 mA / PWM). They
Switching power supply with 24 VDC output. The enclosure offers IP20 protection. It is optimised for DIN rail mounting in electrical cabinets. Loads
Dual differential pressure sensor - DC supply
Dual differential pressure sensor - AC/DC supply
Modbus RTU repeater and power supply - DIN rail mounting
Differential pressure, Air flow sensor with display - DC supply
Differential pressure, Air flow sensor with display - AC/DC supply
Differential pressure, Air flow sensor with display - PoM supply
Differential pressure, air flow controller (high resolution) with display - DC supply
Differential pressure, air flow controller (high resolution) with display - AC/DC supply
Compact digital triac speed controller for DIN rail mounting.
24 Volt switched mode power supply for loads up to 40 Watt. The enclosure offers IP20 protection. It is optimised for DIN rail mounting in
Fan speed controller (electronic)
Duct toxic gas sensor. It measures temperature, relative humidity, CO and NO2 in air ducts. The supply voltage is 24 VDC PoM - this means that
The DSMFX-2R series are multifunctional duct transmitters which measure temperature, relative humidity and CO2 concentration level. Based on the
T, rH - PoM supply
T, rH and TVOC - DC supply
T, rH and TVOC - AC/DC supply
T, rH and TVOC - PoM supply
Temperature sensor for hot water pipes
Temperature sensor with stainless steel probe 85 mm
Passive duct temperature sensor PT500
ECMF8-DM is a fan speed controller with Modbus RTU communication, two analogue/modulating/digital inputs, two tacho inputs and two
Maintenance on-off switch, 20 A, max. switching capacity: 400 VAC AC23 x 400 VAC AC3 5,5 kW. IP66, 4 poles - 2 stages, Red on Yellow, padlock.
Electronic, triac based fan speed controller, microprocessor controlled zero-cross detection.
Fan speed controller (electronic) TK monitoring and alarm output, Modbus RTU communication
These intelligent multifunctional flush mounted room sensors feature adjustable temperature, relative humidity and carbon dioxide (CO2) ranges.