Smoke evacuation shutters and dampers are suitable for use in ventilating protected lobbies, venting to shafts either naturally or mechanically.
The AVANTAGE MP is a motorised and CE marked smoke control shutter that can be perfectly integrated in many smoke control systems.
The spring return actuator BFL(T) is specially designed to remotely control fire dampers.
The spring return actuator BFN(T) is specially designed to remotely control fire dampers.
Optimised circular fire damper with a fire resistance up to 120 minutes, available in small diameters (starting from 100 mm). A minimal pressure
Circular fire damper for surface mounting, with a minimum fire resistance of 120 minutes.
Circular fire damper available in the largest diameters (up to 630 mm) with a fire resistance up to 120 minutes.
Optimised circular fire damper with a minimum fire resistance of 60 minutes, available in small diameters (starting from 100 mm). A minimal pressure
Circular "ES" fire damper with a fire resistance of 60 minutes, available in diameters 100-630 mm and suitable for surface- and remote-mounting,
Circular fire damper with a fire resistance of up to 60 minutes. The surface-mounted collar and short damper tunnel guarantee quick and easy
Optimised rectangular surface-mounted fire damper with a fire resistance up to 120 minutes. CU-LT-1s combines the energy efficiency of our range of
Optimised rectangular fire damper with a fire resistance up to 120 minutes, available in small dimensions.
Rectangular fire damper with a fire resistance up to 120 minutes, available in the largest dimensions.
ATEX certificate TÜV 14 ATEX 7540 X / Explosion protected fire damper for use in zone 1,2 (gas) and zone 21,22 (combustible dust).
Rectangular fire damper with a 120 minutes fire resistance in concrete walls with air pressure up to 1500 Pascal.
Damper with a tunnel casing extension at one or both sides so that the damper blade does not exceed the tunnel. This version allows to connect a
CU2 damper with a tunnel casing extension at the wall side to facilitate the connection to the duct when the supporting construction is thicker than
The CU2/B damper is a battery assembly of several CU2 dampers with maximum 4 individual dampers (B12, B21 or B22) and with a fire resistance up to
Explosion protected fire damper for use in zone 1,2 (gas) and zone 21,22 (combustible dust) with a tunnel casing extension at one or both sides so
Rectangular fire damper with a 240 minutes fire resistance in concrete walls.
The EASY-KAP is a mounting frame designed for smoke evacuation shutters, facilitating secure and efficient installation within vertical shafts. It
Rectangular linear bar grill ensuring 60/90 minutes fire resistance in rigid walls.
Rectangular linear bar grill ensuring 120 minutes fire resistance in rigid walls. The GE120 is ideally suited for the natural ventilation of
Rectangular linear bar grill ensuring 120 minutes fire resistance in rigid walls. The GE120-XL is ideally suited for the natural ventilation of
Rectangular aesthetic non-vision grill with a fire resistance up to 60 minutes in walls, floors and doors.
The finishing frame GzKF can be placed as finishing for the installation opening of the Gz60 grills.
The finishing frame GzKV can be placed as finishing for the installation opening of the Gz60 grill in wooden door panels with various thicknesses.
Smoke evacuation shutter with an aesthetic finish as well as a high air-tightness and thermal and acoustic insulation. Its plasterboard panel
Aesthetic smoke evacuation shutter suitable for ceiling mounting into the bottom of smoke shafts. Smoke evacuation shutters and dampers are suitable
The Kamouflage AP is a vedw-classified smoke control shutter that responds to changes in the BS EN1366-10 test standard for smoke control dampers as
The MARKAGE rectangular Multi MA smoke control damper is suitable for installation in a wall or a refractory duct and has a fire resistance of 90 or