Heavy duty self vulcanising duct sealing tapes made of an elastomeric modified butyl rubber adhesive. Provides a strong and excellent airtight seal
In order to isolate vibrations caused by air handling units and fans connected to air ducts, it is highly recommended to install a flexible duct
The Rubber Mounts AG35 and AG45 are rubber-metal vibration absorbers, especially indicated for elastic support of airconditioning units and small
The AREL is a circular aluminium external louvres with insect screen for air supply and exhaust in ventilation systems. Their enclined aluminium
The ATR is a glass fibre reinforced aluminium tape appropriate for high needs for insulation operations and air conditioning systems.
The kit square foot is designed to support metallic structures (H-frames) on roofs or in industrial spaces.
Ideal for lap sealing foil faced insulation materials, metal and duct sealing and other general purpose applications. They are used to complete the
The Circular Flange System (BCT) is providing a higher stability to the circular ducting networks, thanks to rigid connections of the ducts. This
The platfrom frame BPF is designed to support air conditioning and refrigeration equipment on flat roofs. It allows the quick and easy set up of a
The access doors for round ducting (CAD) consist of two panels connected between themselves with two screws, springs and knobs. The inner panel will
The access doors for round ducting (CAD-SS) consist of two panels connected between themselves with two screws, springs and knobs. The inner panel
The CBR fastening band allows to create a custom made fastening clamp. The band is supplied in a dispenser with markings for easy and efficient cuts
The CDF weldfasteners consist of a steel shank firmly crimped on a steel washer head. It allows the fixing of insulation material on sheet metal
The Antivibration rubber mats are made in Natural Rubber. They range from 45 to 60° Sh. A and can withstand loads from 50 to 12 000 kg. Ideal for
The CLD locking device is specially designed to fit the CBR band. Thanks to it’s locking device with tilting housing and screw, it is easy to adjust
Acrylic water based sealant
Threaded rod connectors in round and hexagonal shape. Used to connect threaded rods to hang ducts, pipes and equipment
The CTKN beam clamps are made to secure threaded rods without drilling or welding onto beams.
The instrument test port is simple, efficient and is a cost effective way of allowing easy measurements inside air ducting. It consists of a Zamac
Access door with insulated inner panel for insulated double wall circular ducts. Consists of two panels connected with two screws, springs and
The E-SVF exhaust valve is manufactured from steel sheets and is powder coated for a high surface finish and good impact and scratch resistance.
The access doors for rectangular ducting (FAD) consist of two panels connected between themselves with two screws, springs and knobs. The inner
The stainless steel access doors for rectangular ducting (FAD-SS) consist of two panels connected between themselves with two screws, springs and
The FBM hose clamps consist of a continuous serrated banding with rounded edges. The tightening device consist of a tilting housing and screw. This
Connecting collars which facilitate the installation and removal of in-lines fans for service and cleaning. Made from galvanised sheet steel and
The G-REL-SS is a circular external louvre for air exhaust or supply made of stainless steel. The louvre is equiped with bird mesh preventing
Perforated bands are designed for suspension of ventilation ducts, pipes and other equipments. Easy to fold and cut, GPB is a quick and competitive
The GT-PE gasket foam tapes are designed to ensure air tightness between a wide variety of elements in duct work systems (between ducts, joining
The Corners are necessary elements for producing the connecting frames for rectangular ductwork. Allows great tightness, stability and ease of
The access doors for round ducting (CAD-HT) consist of two panels connected between themselves with two screws, springs and knobs.
Access doors allow easy admittance to the ventilation ducting for the purpose of inspection and cleaning. Galvanized access door with a double-sided
Available in buckets of 6 Kg and 1 Kg or in cartridges of 310 ml. Excellent adhesion to metal. Use : airtightness on airduct
Consists of a body and diaphragm made out of stainless steel (SS 316L). ABS adjusting device to move with the supplied key or screwdriver. Rubber
Access door with insulated inner panel for round duct. Consists of two panels connected with two screws, springs and knobs.
Access door with insulated inner panel for insulated double wall rectangular ducts. Consists of two panels connected with two screws, springs and
Galvanized steel IRIS air volume control damper of the diaphragm type with pressure measuring points
The suspension ISF (with liner) are used as an hanging system for rigid circular ducts.
Self-adhesive hangers are designed to fix efficiently insulation on smooth surfaces such as air ducts, attenuators, chambers and enclosures.
The suspension brackets are fast, reliable and economical solutions for hanging a duct system.
Roof AC support, with clic system, which allows to build a frame in under 2 minutes and allowing a great versatility in the combinations.
The Antivibration rubber mat is made in Natural Rubber. They range from 45 to 60° Sh. A and can withstand loads from 50 to 12 000 kg. Ideal for
The suspension rings NSF (without liner) are used as an hanging system for rigid circular ducts.
CLIM nylon ties are designed to secure flexible ducts to outlets, pipes and other fittings. Made of high strength nylon, they are easily and quickly
The pads are made in Natural Rubber. They range from 45 to 60° Sh. A and can withstand loads from 50 to 12000 kg. Ideal for insulating all kinds of
Perforated bands are designed for suspension of ventilation ducts, pipes and other equipments. Easy to fold and cut, a quick and competitive way for