Consists of a body and diaphragm made out of stainless steel (SS 316L). ABS adjusting device to move with the supplied key or screwdriver. Rubber
Heavy duty self vulcanising duct sealing tapes made of an elastomeric modified butyl rubber adhesive. Provides a strong and excellent airtight seal
The Rubber Mounts AG35 and AG45 are rubber-metal vibration absorbers, especially indicated for elastic support of airconditioning units and small
The AREL is a circular aluminium external louvres with insect screen for air supply and exhaust in ventilation systems. Their enclined aluminium
In order to isolate vibrations caused by air handling units and fans connected to air ducts, it is highly recommended to install a flexible duct
The ATR is a glass fibre reinforced aluminium tape appropriate for high needs for insulation operations and air conditioning systems.
Ideal for lap sealing foil faced insulation materials, metal and duct sealing and other general purpose applications. They are used to complete the
The Circular Flange System (BCT) is providing a higher stability to the circular ducting networks, thanks to rigid connections of the ducts. This
The CBR fastening band allows to create a custom made fastening clamp. The band is supplied in a dispenser with markings for easy and efficient cuts
The CDF weldfasteners consist of a steel shank firmly crimped on a steel washer head. It allows the fixing of insulation material on sheet metal
The Antivibration rubber mats are made in Natural Rubber. They range from 45 to 60° Sh. A and can withstand loads from 50 to 12 000 kg. Ideal for
The CLD locking device is specially designed to fit the CBR band. Thanks to it’s locking device with tilting housing and screw, it is easy to adjust
The CTKN beam clamps are made to secure threaded rods without drilling or welding onto beams.
The instrument test port is simple, efficient and is a cost effective way of allowing easy measurements inside air ducting. It consists of a Zamac
The E-SVF exhaust valve is manufactured from steel sheets and is powder coated for a high surface finish and good impact and scratch resistance.
The FBM hose clamps consist of a continuous serrated banding with rounded edges. The tightening device consist of a tilting housing and screw. This
Connecting collars which facilitate the installation and removal of in-lines fans for service and cleaning. Made from galvanised sheet steel and
Perforated bands are designed for suspension of ventilation ducts, pipes and other equipments. Easy to fold and cut, GPB is a quick and competitive
The GT-PE gasket foam tapes are designed to ensure air tightness between a wide variety of elements in duct work systems (between ducts, joining
Galvanized steel IRIS air volume control damper of the diaphragm type with pressure measuring points
The suspension ISF (with liner) are used as an hanging system for rigid circular ducts.
The suspension brackets are fast, reliable and economical solutions for hanging a duct system.
The Antivibration rubber mat is made in Natural Rubber. They range from 45 to 60° Sh. A and can withstand loads from 50 to 12 000 kg. Ideal for
The suspension rings NSF (without liner) are used as an hanging system for rigid circular ducts.
The pads are made in Natural Rubber. They range from 45 to 60° Sh. A and can withstand loads from 50 to 12000 kg. Ideal for insulating all kinds of
Perforated bands are designed for suspension of ventilation ducts, pipes and other equipments. Easy to fold and cut, a quick and competitive way for
Self-extinguishing soft PVC tape with an agressive pressure sensitive rubber-based adhesive / Excellent resistance to abrasion, corrosion and
The Rubber Rails with or without bolt sets is a recycled rubber molded block, ideal for supporting all vibrating equipment. Molded aluminium rail
The REL-A is a circular external grill for air exhaust or supply. Pressed with inclined blades preventing the water to enter inside the duct. The
The RG series are simple blade dampers regulators hardware used to manufacture single blade damper on either rectangular or round ducting.
The RG90 is a polyamide single blade damper regulator used to manufacture single blade damper on either rectangular or round ducting.
The S-SVF supply valve is manufactured from steel sheets and is powder coated for a high surface finish and good impact and scratch resistance.
The UFC universal flange clamp is designed to tight up the flanges of two duct sections. It will ensure a better compression of the sealing gasket
The VDK self-drilling screw is designed to assemble 2 sheets of galvanized steel in one single operation. It can drill into a combined total