Temperature based fan speed control , Modbus RTU communication
Electric heating controller (slave unit) with over-temperature protection.
Electric heating controller with integrated temperature sensor
Light and compact 230 VAC autotransformers, 1.5 - 20 A, Eigth voltage taps available: 0-80-100-120-150-170-190-230 VAC, 50-60 Hz
The Modbus RTU serial info is automatically converted to serial information on a USB virtual COM port in both transmitted and received
Analogue to Modbus RTU converter
Switching power supply with 24 VDC output. The enclosure offers IP20 protection. It is optimised for DIN rail mounting in electrical cabinets. Loads
Dual differential pressure sensor - DC supply
Dual differential pressure sensor - AC/DC supply
Modbus RTU repeater and power supply - DIN rail mounting
Differential pressure, Air flow sensor with display - DC supply
Differential pressure, Air flow sensor with display - AC/DC supply
Differential pressure, Air flow sensor with display - PoM supply
Differential pressure, air flow controller (high resolution) with display - DC supply
Differential pressure, air flow controller (high resolution) with display - AC/DC supply
Compact digital triac speed controller for DIN rail mounting.
24 Volt switched mode power supply for loads up to 40 Watt. The enclosure offers IP20 protection. It is optimised for DIN rail mounting in
Fan speed controller (electronic)
The DSMFX-2R series are multifunctional duct transmitters which measure temperature, relative humidity and CO2 concentration level. Based on the
T, rH - PoM supply
T, rH and TVOC - DC supply
T, rH and TVOC - AC/DC supply
T, rH and TVOC - PoM supply
Temperature sensor for hot water pipes
Temperature sensor with stainless steel probe 85 mm
Passive duct temperature sensor PT500
ECMF8-DM is a fan speed controller with Modbus RTU communication, two analogue/modulating/digital inputs, two tacho inputs and two
Maintenance on-off switch, 20 A, max. switching capacity: 400 VAC AC23 x 400 VAC AC3 5,5 kW. IP66, 4 poles - 2 stages, Red on Yellow, padlock.
Electronic, triac based fan speed controller, microprocessor controlled zero-cross detection.
Fan speed controller (electronic) TK monitoring and alarm output, Modbus RTU communication
These intelligent multifunctional flush mounted room sensors feature adjustable temperature, relative humidity and ambient light level. Their
The FI frequency inverters provide reliable intelligent motor starting and control of low power single and three phase motors. They fulfil nearly
Frequency inverter, IP20, supply voltage 3-phase IN, OUT to motor 3-phase, 380-480 VAC, 9,5 A, 4 kW, with internal EMC filter
Flying lead temperature probe, stainless steel tube 53 * 8 mm, PTC 100 Ohm, 1 meter 2 pole wire - 0,5 mm². HVAC temperature sensor.
Temperature based fan speed control - Plug & play
Prewired fan speed controller and electric heater controller. It can control electric heating elements up to 16 A (3,5 kW). The AC fans are
Transformer fan speed controller - with 5 - step automatic temperature control
Differential pressure, Air flow sensor - DC supply
Differential pressure, Air flow sensor - AC/DC supply
Differential pressure, Air flow sensor - PoM supply
Differential pressure transmitter for the range of -125 to +125 Pa
Differential pressure, air flow controller (high resolution) - DC supply
Differential pressure, air flow controller (high resolution) - AC/DC supply
This mechanical thermostat controls temperatures between 0 and 40 °C. The output contact can switch loads up to 16 A. The requested temperature can
Electronic triac based fan speed controller with microprocessor controlled zero-cross detection.