GEOFLAM® FX50 fire resistant boards are non-combustible boards mainly made of glass reinforced gypsum (GRG), which gives them an excellent ...
The square steel swirl diffuser with adjustable plastic drums type WT350 is used for the supply of cooled or heated air in facilities such as ...
Alutex is lightweight, flexible, non-insulated duct designed for the installation into the existing and new ventilation systems. It is made of ...
The CDF weldfasteners consist of a steel shank firmly crimped on a steel washer head. It allows the fixing of insulation material on sheet metal ...
The stainless steel access doors for rectangular ducting (FAD-SS) consist of two panels connected between themselves with two screws, springs and ...
Shut-off damper made for shutting of air ducts made of galvanised sheet steel or optionally of stainless steel. The saft feed-through of the ...
Galvanised round VAV unit with low resistance damper blade, supplied with an electronic actuator and aluminium differential pressure sensor. This ...
Inno is a damper for circular ducts. It is completely made from soft elastic plastic foam with good damping abilities.Inno is a damper for circular ...
The flow regulator RDR is an element placed inside the duct in order to obtain a constant flow within a pressure range from 150 to 600 Pascals. It ...
Galvanized steel IRIS air volume control damper of the diaphragm type with pressure measuring points ...
Circular fire damper for surface mounting, with a minimum fire resistance of 120 minutes.
