AURÉA exhaust valves exhaust and supply air in dwellings and commercial spaces. These white plastic valves are specially designed to be fitted in
TMM (wall) metal vents is used to supply and exhaust air in single and dual-flow mechanical extract ventilation systems. It's specially designed for
Exhaust valve designed for constant, preset airflow. Easy to install and maintain, it offers excellent performance combined with an aesthetic
Self-regulating exhaust valve equipped with a 30-minute timed boost function, which can be activated via three different mechanisms: pull cord, 230V
The Alize BLUE range consists of humidity-controlled kitchen extraction vents that are battery powered for a quick and easy installation. A remote
The extract vents CO2 are used for tertiary applications. They ensure a modulated extraction flow according to the CO2 levels of the premises.
Humidity-sensitive exhaust valve designed for continuous, automatic ventilation based on relative humidity levels. Operates silently without manual
Humidity-sensitive exhaust valve with a 30-minute boost function, ideal for areas with variable ventilation needs. Boost can be manually activated
High-end humidity-sensitive exhaust valve with integrated presence detection. Automatically triggers a 30-minute boost when occupancy is detected,
Self-regulating exhaust valve equipped with a 30-minute timed boost function, which can be activated via two different mechanisms: pull cord or a
Adjustable exhaust valve with minimum flow rate (humidity controlled on Hygro version), includes a 30 minute ventilation boost activated by presence
BEIP adjustable valves are made of white polystyrene. They exhaust and supply air in dwellings and commercial spaces in combination with heating,
Made of sheet steel covered with white epoxy paint, the BEMR vents consist of a suction cone, an adjustment shut-off and a lip seal for maintenance
The BES metal valves are designed for rooms where it must not be possible to tamper or dismantle the extract vents.
BIR valves make it possible to diffuse air in only one direction. As a result, these valves may be fitted near the corners of walls without any risk
BORÉA white adjustable plastic vents are intended for inlet and extract air flows air in housing and tertiary premises. These vents are specially
Designed for use in ventilation installations, CAR backdraft dampers prevent outdoor air entering if the fan stops running.
The CARA roof vent is used for the air outlet or intake of installations using mechanical ventilation systems: single and double flow CMV, domestic
These roof vents supply and exhaust air in systems that use mechanical extract ventilation (single and dual flow MEV systems, air handling and
The CTP2 roof vent is used for the air outlet or intake of installations using mechanical ventilation systems: single and double flow CMV, domestic
Aelf-regulating acoustic air inlet designed for wall installation in Ø125 mm openings. It ensures a constant airflow of 22, 30 or 45 m³/h within a
Used as part of an ALIZÉ 2018 humidity-controlled ventilation system for collective housing or individual housing under Technical Approval, the EM 2
The air-inlets FILEA 30 are used to supply new air in the main rooms of a dwelling with single flow mechanical ventilation system.
GAE grilles made of polystyrene or ABS can be mounted on the outside or inside. Made of white polystyrene or other colors on request, GAE louvred
GEM grilles, made of white polystyrene, can be mounted on the outside or inside. GEM 100 external wall grille (Ø 100) or GEM(M) 125 external wall
The ISOLA or ISOLA RA acoustic self-regulating air inlet, fitted on the inside, is made of polystyrene. The anti-mosquito feature is ensured
Used as part of an ALIZÉ 2018 humidity-controlled ventilation system for collective housing or individual housing under Technical Approval, the
PA air intakes provide fresh air intake or stale air outlet on the external wall in mechanical ventilation installations. The assembly consisting of
RDR adjustable flow regulators are made from class M1 plastic suitable for use at temperatures up to 60°C.
The flow regulator RDR is an element placed inside the duct in order to obtain a constant flow within a pressure range from 150 to 600 Pascals. It
The RDR HP-UL is an element placed inside the duct in order to obtain a constant flow within a pressure range from 0.6 to 2.4 in.w.g. Used in both
RDR LP (RDR BP) adjustable flow regulators fit inside ducts to obtain a constant flow rate within pressure range of 20 to 100 Pa. They may be used
The RDR LP-UL is an element placed inside the duct in order to obtain a constant flow within a pressure range from 0.08 to 0.4 in.w.g. Used in both
The RDR-UL is an element placed inside the duct in order to obtain a constant flow within a pressure range from 0.2 to 0.1 in.w.g. Used in both
The RFCC cable operated damper is a circular damper for shutting off a branch duct in a ventilation or air conditioning network. It is fitted with a
The RM-ME motorized damper works in fully-open/fully-shut mode, operated by an electric motor
RM-ME self-regulating dual-flow motorised dampers are designed for ventilation systems used in commercial spaces. They modulate open and closed via
RMVT motorised dampers are powered by an On/Off blade driven by a thermal actuator. They feature a 100 mm to 200 mm circular blade to shut off the
RRM manual balancing dampers contain round blades to balance the flow of air in ventilation and air conditioning systems. They feature a composite
RRMJ manual balancing dampers contain round blades to balance the flow of air in ventilation and air conditioning systems. They feature a composite
TMP (ceiling) metal vents is used to supply and exhaust air in single and dual-flow mechanical extract ventilation systems. It's specially designed
These exhaust valves are made of white plastic and are generally suited for applications in single-family houses. They are used to supply and