Round throttle valve in galvanized steel for motorized use. Housing made of galvanised sheet steel or stainless steel. They push-fit ends are
ACT-H are circular motorised dampers to regulate air flow in duct systems. The damper blade position can be regulated via an analogue / modulating
Shut-off damper made for shutting of air ducts made of galvanised sheet steel or optionally of stainless steel. The saft feed-through of the
Round throttle valve in galvanized steel for manual use. Housing made of galvanised sheet steel or stainless steel. They push-fit ends are
Steel butterfly damper with radial positioned opposite turning segments. Construction made of steel plated painted black in RAL9005. With mounting
Inno is a damper for circular ducts. It is completely made from soft elastic plastic foam with good damping abilities.Inno is a damper for circular
Inno is a damper for circular ducts. It is completely made from soft elastic plastic foam with good damping abilities. The damper has a number of
Consists of a body and diaphragm made out of stainless steel (SS 316L). ABS adjusting device to move with the supplied key or screwdriver. Rubber
Galvanized steel IRIS air volume control damper of the diaphragm type with pressure measuring points
Damper rectangular, for pressure and volume flow control in HVAC-systems, casing made of galvanized steel.
Blades width 100 or 165 mm airtight EN 1751 Cl. 4; min. flow resistance and noise; coupling and drive possibilities for all requirements, high
Standard blades width 100 or 165 mm; min. flow resistance and noise; coupling and drive possibilities for all requirements. Available in all
Opposed blade damper with galvanised steel housing and extruded aluminium counter rotating blades. The aluminium blades are equipped with an air
The RFCC cable operated damper is a circular damper for shutting off a branch duct in a ventilation or air conditioning network. It is fitted with a
The RG series are simple blade dampers regulators hardware used to manufacture single blade damper on either rectangular or round ducting.
The RG90 is a polyamide single blade damper regulator used to manufacture single blade damper on either rectangular or round ducting.
RMVT motorised dampers are powered by an On/Off blade driven by a thermal actuator. They feature a 100 mm to 200 mm circular blade to shut off the
RRM manual balancing dampers contain round blades to balance the flow of air in ventilation and air conditioning systems. They feature a composite
RRMJ manual balancing dampers contain round blades to balance the flow of air in ventilation and air conditioning systems. They feature a composite
Sava is designed for the air flow control and sound attenuation in supply and exhaust air duct systems. Sava is a perfect sound attenuator in